There’s no universally best country or VPN server. The choice depends on what you’re going to do: browse ordinary websites, work, watch videos or play games online. Let’s look at how to choose the right server and country, when it’s worth switching, and how to switch in MeduzaVPN.
How to choose a VPN server
Connection quality doesn’t depend on the VPN service alone. Between your device, the chosen node and the site you need lie the networks of several operators. The server determines which route your traffic takes and where it exits to the internet. That’s why the same VPN can perform differently in different locations. If you need the basics, start with the article “What is a VPN server and how does it work”.
Distance to the server and ping
Ping is the time it takes a small packet to reach a node and for the reply to come back. The longer the path, the higher the latency: the signal takes time to travel, and network equipment takes time to process it. The nearest server usually gives a lower ping, so it makes sense to try it first. For gaming and video calls, this often matters more than top speed.
Distance on a map and the network path aren’t the same. The route to a neighbouring country may pass through a distant node, while the route to a farther data centre may be direct. Besides distance, links and load matter: compare two or three nearby locations from your own network.
Connection speed
A VPN doesn’t increase the bandwidth of your home internet or mobile plan. If the connection is slow without the tunnel, changing countries won’t fix weak Wi-Fi or a poor signal. Measure your baseline speed, then repeat the test with the VPN on the same device. Pause downloads and updates while measuring so they don’t take up bandwidth.
The result is limited by the narrowest link: your network, the route, the data centre’s uplink or the node’s resources. Server bandwidth varies. For video, download speed matters more; for calls and sending files, both directions do.
Server load
On a shared VPN node, users share the computing resources and the uplink. Under heavy load, queues form, latency rises and speed drops. That’s why in the evening one server may perform worse than another in the same country. If the location suits you, first try a neighbouring node rather than moving your whole route to another continent.
A personal server removes competition with other VPN users on your instance, but your own devices share its uplink, and the capacity of external networks is finite too. Learn more in our comparison of personal and shared VPNs.
Connection stability
One good measurement doesn’t yet mean reliable performance. With packet loss, data has to be resent; video calls freeze and games respond with a delay. An unstable route can cause the tunnel to drop even if speed is high between failures. Also watch the spread in latency: ping spikes get in the way of interactive tasks.
Test the location on a call or a video. A moderately fast server with no drops is more convenient than a record-breaking but unstable one. If there are failures without the VPN too, check your base network first.
VPN protocol
The protocol defines how the tunnel is established and how data is carried. It affects overhead, device compatibility and behaviour on a particular network. If the server is reachable but the connection hangs or drops, try another available VPN protocol in the same location. Change one setting at a time; otherwise it’s hard to tell what helped.
Which country to choose for a VPN
Choose the country for the task: a nearby location is convenient for everyday work, while for gaming and calls a short route to the target server matters. The flag in the app shows the country, but it doesn’t rate the quality of the connection.
For everyday internet use
For websites and messaging, choose the nearest stable location. The priorities are speed and low ping. There’s no need for a distant country unless you need one: the best options for users in Europe and Asia may differ.
For privacy and connection security
For privacy, what matters isn’t the country but how the service is built: tunnel encryption, a separate IP that isn’t shared with other users, and a clear logging policy. Websites see the server’s public IP instead of your home address, but they may take into account your account data, payment method, app settings or device location. A VPN changes your network address, but not all of that data. If one server is unstable, first try another server in the same country.
For video and streaming
You need sufficient speed and no drops. Check playback at your chosen quality. If it buffers, compare several nodes in the same country. Speed to a test node doesn’t guarantee the same speed to a video platform, so test with real video.
For online gaming
A consistently low ping and no packet loss matter more. Consider where the game server is: traffic goes to the VPN first, then to the game. Compare latency inside the game, not to some other site. A VPN sometimes improves the route, but it can also increase latency.
For work and everyday tasks
For work, stability is the priority; the nearest suitable location is usually enough. A separate IP is handy when access to work systems is open only to known addresses: after changing servers, ask your administrator to update the address on the allow list.
| Country | Speed and ping | Tasks | Advantages | What to consider |
|---|---|---|---|---|
| Germany | Proximity suits users in Europe; the result depends on the route | Work, websites, calls | A short path with no transatlantic leg for European users | Compare cities and data centres; check latency from your network |
| Netherlands | A sensible candidate for a European connection | Everyday internet, video, work | A convenient point of comparison with other European nodes | The result depends on your carrier’s route |
| Finland | Geographically close to some users in Northern Europe | Calls, work, everyday internet | A potentially short route for northern regions | Being close on the map doesn’t guarantee a direct network route |
| USA | Latency from Europe is usually higher; differences between the coasts are significant | Gaming on US servers, working with US-based hosts | A short path to hosts in the USA | Pick the coast and city for the task; check video speed |
| United Kingdom | For European users the path is usually shorter than to the USA | Work, calls, everyday internet | Another European point for comparing routes | Compare latency with nodes in continental Europe |
| Japan | A closer option for East Asia, a distant one for Europe | Gaming on Japanese servers, work in the region | A short route for users in East Asia | From distant regions, latency may get in the way of calls and gaming |
| Singapore | A candidate for users in Southeast Asia | Work and calls in the region | A convenient point for comparing Asian routes | The path from Europe is long; compare with your actual destination |
The table doesn’t promise any particular speed. Check country availability against the current list. Before choosing, compare latency from your own network; in your MeduzaVPN account, pay attention to the recommendations and labels next to locations.
When to change your VPN server
Changing servers means connecting to a different node; changing countries means choosing a node in a different location. You can get a new address while keeping the same country. Reconnecting to the same node doesn’t necessarily change your IP.
- Speed has dropped noticeably. Compare the VPN with a direct connection. If your base network is fine, try another server in the same country and measure again.
- Ping has gone up. Check whether a background download is running. Choose a closer location or a node closer to the game server, then compare latency in the app you need.
- The connection drops from time to time. Reconnect, try a different network and another available protocol. If the failure is tied to the node, change servers.
- A site you need works with errors. Check whether other sites work and the status of the service itself. If the problem only happens over the VPN, try another node in the same country or a different protocol.
- The server is unstable. Wait for any operation currently running on the server to finish. If the problem persists, compare a neighbouring node and contact support with a description of your network and the time of the failure.
- You need a new IP address. Choose “Change IP” in your account: the server will move to another node in the same location. Changing the protocol on the same server doesn’t change the address.
How to change your VPN server in MeduzaVPN
In MeduzaVPN, changing the location moves your personal VPN. Your public IP may change, and current connections may be interrupted. Save your work and wait for the move to finish before connecting again.
How to change servers in the MeduzaVPN app
- Open the app and select your VPN if you have several active services. Check the current location so you change the right server.
- Open location selection for this VPN. Choose an available country and, if the app offers a choice of city, a suitable city. The name and position of the control depend on the app version.
- Confirm the change and wait until the server is ready. Don’t start another move while the current operation is running.
- Connect to the VPN again. Check the selected location in the app and the public IP in a browser whose traffic goes through the tunnel.
If your version doesn’t have this action, use your account. It has “Change IP” for another node in the same location. Changing the protocol isn’t the same as changing servers. The latest app is on the MeduzaVPN download page.
How to change the server country in your account
- Sign in to the VPN owner’s account and open “Your active services”. Find the actions menu on the card of the VPN you need. A user with invited access can’t move someone else’s server.
- Click “Change location”. A window titled “Choose a VPN location” opens with a list of available countries.
- Choose a country, then a city if there are several. The specific server in the chosen city is picked automatically. Take into account the recommendations and warnings in the current list.
- Save your choice with the “Change location” button. Wait for the operation to finish and for the service card to update.
- Connect again and check the country and address. The app will pick up the updated settings; for a third-party client, get a fresh configuration from your account and import it in place of the old one.
For another node in the same location, choose “Change IP”. The old address is released with no way to get it back, and any separately saved configurations need to be replaced. Changing your IP again is time-limited — see the message in your account.
A move affects every device connected to the personal server, including shared-access users: warn them about the interruption. You don’t need a new account to change countries.
How to check your VPN server after switching
- Check your public IP. Open an IP-checking service in a browser that uses the VPN and compare the address with the previous one. Your device’s internal Wi-Fi address won’t do for this.
- Check the country. Compare the result with the location you chose. Geolocation databases update with a delay and sometimes disagree: if there’s a mismatch, check one more source and contact support.
- Measure the speed. Use the same test node and device as before switching. Compare download and upload; take several measurements without background downloads.
- Check the ping. For games, look at latency inside the game; for work, latency to the service you need. A single test to a random node doesn’t show the quality of every route.
- Assess stability. Look for latency spikes, packet loss, frozen calls and repeated reconnections. Checking over a normal working session is more useful than one short measurement.
- Open the site or service you need. Test sign-in, video playback or another real task. If something doesn’t work, compare with a connection without the VPN and contact support.
With split tunnelling, an excluded app goes direct and shows your original IP. Test with a browser that’s included in the VPN route.
FAQ
Does my IP address change when I switch VPN servers?
Usually yes: websites start seeing the address of the new exit node. Several servers of a shared VPN can use the same exit IP, so it’s worth checking the result. In MeduzaVPN, the “Change IP” action moves your personal VPN to another server in the same location with a new address. The old IP is released and can’t be got back.
Do I need to disconnect the VPN before changing servers?
It depends on the client. If the app can switch while connected, it will reconnect the tunnel itself. When a personal server is being moved, the connection will drop: wait for the operation to finish and connect again. It’s best to pause a call, game or file transfer while switching.
Can I use the same VPN server all the time?
Yes, if it’s stable, suits your tasks and gives you the speed you need. Changing countries regularly doesn’t improve security in itself. Change servers when there’s a specific reason: the connection gets worse, latency goes up or you need a new address.
Why do servers in the same country run at different speeds?
They may differ in data centres, network links, routes from your ISP, load and protocol settings. Even two servers in the same city don’t have to give the same result. Compare them on the same device, on the same network and with the same protocol, ideally over several runs.
